Phase Technology

Phase Technology was founded in 1989 by Charles and Norman Tsang and has grown organically through the design and engineering of highly innovative and functional products, dedication to research and development and precise cost-effective manufacturing capabilities. Phase has an outstanding reputation as a leader in the cold-flow properties testing industry due to consistent introduction of new innovative products and continual improvement in the quality, design and capabilities of its offerings

phase-logo.jpg
Image by RephiLe water

01

OptiMVD:  Viscometer and Density Meter

 
optimvd_web_large.png

OptiMVD is a mini viscometer and density meter designed for today’s modern laboratory. Available in three different configurations, all models load the sample, perform viscosity and density measurement, and clean the system automatically. The dual carousel model allows programming up to 48 samples at a time. All models can measure samples with a viscosity range from 1 mm2/sec to 2,000 mm2/sec at 40°C.

Safe and cost-effective to own and operate, the constant pressure viscometer has a precision that meets or exceeds ASTM D445 or its equivalents.

02

MFA: Marine Fuel Viscosity, Density & Cold Properties

 
phase technology dfa-70xi.jpg

Phase Technology’s new MFA-70Xi analyzer measures cloud point, pour point, viscosity and density of light marine distillate fuels like DMX, DMA, DMZ, and DMB. Marine Gas Oil (MGO) will need to have less than 0.5% of sulfur, a significant decrease from the existing 3.5 %, according to the MARPOL 2020 convention. The MFA-70Xi is completely self-cleaning, and completes all the tests in less than 25 minutes.

03

DFA-70Xi: Diesel Cloud, Pour, Viscosity & Density

 
phase technology dfa-70xi.jpg

Phase Technology’s new DFA-70Xi analyzer is the world’s first and only instrument that performs four important diesel fuel tests in one single unit—cloud point, pour point, viscosity and density. And, it does it all in less than 25 minutes!

The DFA-70Xi features a new, side loaded automatic sample injection port. There’s no longer a need to manually pipette. The analyzer always draws the precise amount of sample as required by the ASTM method. The DFA-70Xi is completely self-cleaning, without the need of solvents. Save time and hassle of cleaning, and avoid any risk of damage to the sample cup.

04

JFA-70Xi: Freeze, Viscosity & Density

 
phase technology dfa-70xi.jpg

Phase Technology’s new JFA-70Xi jet fuel analyzer is the world’s first and only instrument that performs three crucial tests in one unit—freeze point, viscosity and density. The JFA-70Xi features a new, side loaded automatic sample injection port. There’s no longer a need to manually pipette.

The JFA is completely self-cleaning, without the need of solvents. Save time and hassle of cleaning, and avoid any risk of damage to the sample cup. ASTM has updated D1655 jet fuel specification to include Phase Technology’s ASTM D7945, as used in the JFA-70Xi jet fuel analyzer.

The 70Xi is available in manual, single shot or with a 48-station autosampler, which allows unattended testing. Users can initiate 1 to 48 runs in a row, then walk away and let the analyzer do the rest.

05

70Xi: Cloud, Pour & Freeze Point

 
phase-technology-70xias.jpg

The PSA-70Xi Cloud, Pour and Freeze Point is the world’s only analyzer that performs pour, cloud and freeze point in one unit. Combining functions saves money and valuable bench space in the lab, while optimizing workflow.

The 70Xi is available in single shot or with a 48-station autosampler, which allows unattended testing. Users can initiate 1 to 48 runs in a row, then walk away and let the analyzer do the rest.

06

WAT-70Xi: Wax Appearance Temperature

 

Check out other PAC Brands

PACLOGO.png
AC-logo.jpg
alcor_logo.png
Petrospec-logo.jpeg
antek-logo.png
phase-logo-Black.jpg
600w_herzog_blk_logo.jpg
isl-logo.jpg